Quaker Houghton Hocut 4260

Quaker Houghton Hocut 4260 is advanced, low to medium duty, boron-free and formaldehyde-free emulsion technology giving very long sumplife. 


A special additive package gives greatly enhanced machining performance and extends tool life, compared to conventional products. Hocut 4260 is particularly effective on machining aerospace airframe structural components in aluminium alloys,

titanium alloys or fiber composites. 

Waarom kiezen voor KSM

  • Gemiddeld 10% voordeliger dan online
  • Al ruim 65 jaar praktijkervaring
  • Meer dan 1.000 klanten
  • Altijd een merkonafhankelijke oplossing
  • Totaaloplossing: (koel)smeermiddelen én services
Contact: binnen 4 uur een reactie

Enkele van onze meer dan 1.000 referenties

Approvals and conformities

Quaker Houghton Hocut 4260 holds the following approvals and conformities:

  • Airbus AIPS00-00-010 & A2MS 569-001;

  • Boeing BAC 5008 cat. 5 & 6: conform;

  • Bombardier BAMS 569-001: A, C & D: approved;

  • Dassault: DGQT 1.7.0.0092;

  • Rolls Royce: CSS 129, CSS 131;

  • SAFRAN Engines / SNECMA : 455-201-0-00 & PR 6300 approved on all materials;

  • SAFRAN Landing Systems: PCS 4002 steels, titanium & aluminium alloys, hard Cr grinding.

Applications

  • Quaker Houghton Hocut 4260 is recommended for low to medium duty machining including high speed of a wide range of aerospace materials including aluminium alloys (series 2000 and 7000 in particular), fiber composites, but also ferrous alloys. Hocut 4260 is suitable too for grinding applications. 
     
  • The product is suitable for both centralised systems and single sump machines while the advanced boron-free technology extends emulsion life without the need for regular biocide treatments. 
     
  • The versatile formulation is designed to give low foam and no soaps in soft to hard water (10°dH – 70 °dH cumulated hardness). 
     
  • Its operator-friendly EHS profile and its non-staining & corrosion free properties make Hocut 4260 particularly efficient on aero structural airframe components. An advanced antiwear additive extends the tool life tool.

Benefits

  • Versatile : can process very various materials, ranking from fiber composites, to aero aluminium alloys as well as ferrous alloys;

  • High detergency : leaves clean parts and working environment;

  • Extended tool life : thanks to antiwear additive package tool wear is minimized, saving tooling costs;

  • Very long sump-life : new Hocut 4000 series emulsion technology extends intervals between clean outs;

  • Very stable emulsion : fewer additive treatments and lower usage costs;

  • Inhibits aluminium staining : can be used for sensitive alloys eg 7000 series;

  • Very low foaming : ideal for the highest speeds and pressures in soft to hard water (10°dH – 70°dH);

  • Excellent EHS profile : boron, formaldehyde, chlorine and phenol-free. Contains only TRGS 611 approved amines.

Health, Safety and Handling

Please consult the Safety Data Sheet (SDS) for information on storage, safe handling and disposal. The conditions or methods of handling, storage, use and disposal of the product are beyond our reasonable control – we assume no liability for any ineffectiveness of the product or any injury or damage, arising out of or in connection with these conditions.

Offerte aanvragen

Voor meer informatie kunt u altijd contact opnemen.

Bel: 0318-555129
Stuur ons een e-mail

Volg KSM op LinkedIn

Meteen op de hoogte zijn van o.a. nieuwe producten en/of oplossingen, KSM nieuws en interessante artikelen/video’s? Volg ons dan via LinkedIn en ontvang automatisch updates.

Wilt u ook maximaal produceren tegen minimale kosten?

KSM heeft haar jarenlange ervaring en kennis, topkwaliteit producten én veelzijdige service gebundeld in de RCL (Reliability Centered Lubrication) methode. Hierdoor wordt stapsgewijs, zowel op product- als procesniveau, de klant begeleid naar het maximaal produceren tegen minimale kosten door middel van optimaal (smeertechnisch) onderhoud.
Het resultaat: productiemaximalisatie, een verlaging van risico’s en tot wel 30% kostenbesparingen.